Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured.
The equipment are fitted with inbuilt limiters to prevent unwanted movements.
The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness.
Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover.
High tensile steel with galvanized nut bolts are used for assembly.
Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment.
Self-Explanatory stainless steel label fixed on equipment for ease of use.
Dimension (LxWxH): 1800 x 700 x 1800 mm.
Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make.
Seat main frame of NB 50mm (G.I.) ‘C’ Class Pipe, Pipe connecting main post with handle frame of NB 65mm (G.I.) ‘C’ Class Pipe.
Handle frame of NB 32mm and NB 25mm (G.I.) ‘C’ Class Pipe.
(‘NB’ stands for Nominal Bore i.e., Internal Diameter of pipe in millimeters)
All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints.
All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.
Zinc primer paint is applied at all the welding points prior to finishing.
Handle bars are provided with high end quality rubber grips.
Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored.
Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UV resistant and environmental friendly.