All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.
Zinc primer paint is applied at all the welding points prior to finishing.
Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored.
The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness.
Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover.
High tensile steel with galvanized nut bolts are used for assembly.
Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment.
Bridge Ladder (Monkey Bar):
- Dimension (LxWxH): 3000 x 1200 x 2200 mm
- Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make.
- Main Frame of NB 32mm & 25mm (G.I.) ‘C’ Class Pipe.
- Powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick.
- (‘NB’ stands for Nominal Bore i.e., Internal Diameter of pipe in millimeters)
- All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints.