Grand Slam Fitness GS 1122 HIP & BACK MASSAGER
All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.
Zinc primer paint is applied at all the welding points prior to finishing.
Equipment made to meet EN16630 specifications-European standard for permanently installed outdoor fitness equipment.
Self-lubricating German bearing for maintenance-free usage.
Reinforced foot pedals for extended life.
J hook system with 18 mm thickness used for grouting for higher stability and ease of installation.
Non fading Virgin LLDPE makes all plastic components sun fade resistant.
All open ends of the pipe either sealed in or closed by GI/LLDPE caps for user safety.
High tensile steel with galvanized nut bolts are used for assembly.
Self-Explanatory stainless steel label fixed on equipment for ease of use.
Equipped with a range of motion internal limiters.
Dimensions :33 X 31 X 71 in.
Epoxy coating of at least 100 microns to prevent any damage from extreme weather conditions.
Thick galvanized main post-of:114 mm diameter.
The thickness of pipes varies between 3.5 mm to 7.5 mm.